About
Significantly Reduces Product Loss and Downtime
The Magna-Plug is a magnetic connector which has been designed primarily to reduce cable and probe breakage in manufacturing processes, translating into cost savings and reduced production interruptions for the customer.
The Magna-Plug has two connectors: a male connector and a female connector. It also has a female connector variant for panel mounting. The body of the connectors is made of food grade Teflon, which meets FDA specifications. It is also equipped with a stainless-steel ring to give it more stiffness. Right now, this magnetic connector comes with 6 pins which can accommodate up to 18 caliber conductors.
On the outside of this magnetic connector, universal cable glands can accommodate various cable diameters. Magna Plug is completely waterproof and submersible, meeting IP 67 specifications. But the key part of our magnetic connector is the magnet inside the connectors.
The force of the magnet is 10 pounds, enough to withstand armed or shielded cables in the process without disconnecting and the only way you can connect them is by the self-alignment magnets. The advantage of this feature, of course, is it can be easily disconnected, so that if, for example, an operator moves a food shelf in which the connector is used for a temperature probe or if a manufacturing equipment is moved and the cable is pulled, connectors shall be separated without damage and without interruption due to damaged cables or sensors.
The same principle applies for the panel mount connector. The only difference is that this can be mounted with a bracket on one panel and the other connector will come to make the coupling very easily.
This magnetic connector can be used for any kind of application for low voltage of 48 VDC or less, and signals such as 4 to 20 mA.